Health Center's New Backend

Discuss Engarde latest news and updates

Moderators: scrumpy, Dave, leihog

Health Center's New Backend

Postby wkeys on Tue Oct 07, 2008 9:38 am

hi Everyone,

Please help us test our new backend for the WebTool's Health center by following the instructions below.

If you open up the Health Center and do not see any information after you're put it through Autoconfiguration, please send us the output of the following command, run as root:

Code: Select all
# sensors -f


Please post your output to this thread to help us continue to improve this module.

Thank you
~Bill Keys
wkeys
 
Posts: 283
Joined: Thu Feb 01, 2007 5:43 pm

Re: Health Center's New Backend

Postby ruudsplint on Wed Mar 10, 2010 6:32 pm

Hi,
This is what I see:
[admin@home ~]$ sensors -f
emc6d100-i2c-0-2e
Adapter: SMBus I801 adapter at fc00
in0: +0.00 V (min = +0.00 V, max = +3.32 V) ALARM
in1: +1.48 V (min = +0.00 V, max = +2.99 V)
in2: +3.25 V (min = +0.00 V, max = +4.38 V)
in3: +5.13 V (min = +0.00 V, max = +6.64 V)
in4: +11.75 V (min = +0.00 V, max = +15.94 V)
in5: +0.00 V (min = +0.00 V, max = +4.38 V)
in6: +0.02 V (min = +0.00 V, max = +1.99 V)
in7: +0.00 V (min = +0.00 V, max = +2.39 V)
fan1: 1455 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +32 F (low = -197 F, high = +261 F)
temp2: +88 F (low = -197 F, high = +261 F)
temp3: +100 F (low = -197 F, high = +261 F)
pwm1: 0
pwm2: 0
pwm3: 0
vid: +1.525 V (VRM Version 9.0)

The Health Center doesn't show CPU and Sys Temp and Fan Status.
Also I would like to see the temp in Celsius.

Rudolf
ruudsplint
 
Posts: 1
Joined: Sat Mar 06, 2010 7:39 am


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 2 guests

cron