nforce problem

[simby]

Hi!

Can you please add for nforce sata support. I have nforce 6100 and i can t instal engarde linux?

Thanks
Tomaz

[eric]

Tomaz,

Before we can add support for it, we need to know the output of /proc/pci. Copy the contents of /proc/pci to the forum for us so we can know the PCI IDs. You probably want to use the sata_nv driver.

Eric

[simby]

Hi,

can i post this from other linux, becouse i can t istall Engarde.

Yes, this is SATA drive.

Thanks for your support Eric

[eric]

simby,

Yes, you can post this however you can boot up. You can use the LiveCD mode of EnGarde or another Live distibution if thats all you have available.

Eric

[simby]

0000 10de02f1 0 0 0 0 0 0 0 $
0001 10de02fa 0 0 0 0 0 0 0 $
0002 10de02fe 0 0 0 0 0 0 0 $
0003 10de02f8 0 0 0 0 0 0 0 $
0004 10de02f9 0 0 0 0 0 0 0 $
0005 10de02ff 0 0 0 0 0 0 0 $
0006 10de027f 0 0 0 0 0 0 0 $
0007 10de027e 0 0 0 0 0 0 0 $
0010 10de02fc b9 0 0 0 0 0 0 $
0018 10de02fd c1 0 0 0 0 0 0 $
0020 10de02fb c9 0 0 0 0 0 0 $
0028 10de0242 b f2000000 e000000c 0 f5000004 0 0 $
0048 10de0270 0 0 0 0 0 0 0 $
0050 10de0260 0 0 0 0 0 0 0 $
0051 10de0264 b 0 0 0 0 1c01 1c81 $
0052 10de0272 0 0 0 0 0 0 0 $
0058 10de026d 32 f7002000 0 0 0 0 0 $
0059 10de026e e9 f7003000 0 0 0 0 0 $
0068 10de0265 0 0 0 0 0 f001 0 $
0070 10de0266 d1 9f1 bf1 971 b71 e401 f7001000 $
0078 10de0267 d9 9e1 be1 961 b61 d001 f7000000 $
0080 10de026f 0 0 0 0 0 0 0 $
00c0 10221100 0 0 0 0 0 0 0 $
00c1 10221101 0 0 0 0 0 0 0 $
00c2 10221102 0 0 0 0 0 0 0 $
00c3 10221103 0 0 0 0 0 0 0 $
0140 10ec8139 e1 b001 f4000000 0 0 0 0 $



Is this ok?

[eric]

simby,

Yes, this is the information we need. We will attempt to have support for this in the 3.0.9 release of EnGarde. Thanks.

Eric

[simby]

thanks, i can t wait :mrgreen: