fedora-users October 2011 archive
Main Archive Page > Month Archives  > fedora-users archives
fedora-users: Re: Serial port permissions -

Re: Serial port permissions -

From: Bob Goodwin <bobgoodwin_at_nospam>
Date: Tue Oct 18 2011 - 23:13:27 GMT
To: users@lists.fedoraproject.org

On 18/10/11 17:19, Brian Mury wrote:
> No CAT control for your radio? What radio are you using?
> Perhaps an older GPS with serial output?

        No GPS. An old Kenwood TS440S, has antenna tuner but no external
        digital control. It also has AFSK in and out, as well as a DIN
        connector with everything at one point, date, ptt, mic. mute,
        etc. I plan to use that.

> I configure my Icom 2820 to send GPS NMEA data out the serial port. It
> gives me a constant stream of serial data, which is useful for
> troubleshooting.
>
> How have you configured fldigi? Specifically the "Hardware PTT",
> "RigCAT", and "Hamlib" tabs (subtabs of the "Rig" tab)? Screenshots of
> those three tabs would be useful.

        I would hesitate to send image files to the list, can send to
        your address?

>> Brian, I assume the one connector on the back of both computers
>> will be seen as ttyS0. FLDigi is set to ttyS0
> If you only have on physical serial port, it is probably ttyS0, yes
> (though I suppose it's not guaranteed).
>

            [root@box9 bobg]# setserial -g /dev/ttyS[0123]
            /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
            /dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3
            /dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4
            /dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3

        So /dev/ttyS0 looks good to me ...

> I mentioned earlier that I don't use DTR/RTS control, but I could
> configure it for that and put a meter on those pins to see if it
> works. I won't be able to do it today, but can probably find a few
> minutes tomorrow evening.

        That would probably be an imposition on your time but would
        provide assurance that the function works.

        Additionally I have yet to see transmit audio from the computer
        while running FLDigi, I do get it from psk31lx. I have not had
        keying signals from psk31lx either but have not devoted much
        time to investigating that, it may be a configuration problem
        and I haven't found much documentation in that area.

        Bob

> Brian

-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines