Re: [Wireshark-users] One NIC on public side

From: <mike_at_nospam>
Date: Fri May 14 2010 - 00:28:16 GMT
To: wireshark-users <wireshark-users@wireshark.org>

On Thu, 13 May 2010 17:04:08 -0700, Gianluca Varenni wrote:
> This means that WinPcap is properly installed.
> Are you sure the NICs are connected to the proper ports on the hub?

The cap driver is working fine. I can see data on the lan nic. For some reason, the new server doesn't see anything on the hub so I guess I'm stuck putting it on the core switch just after the firewall. Wish I knew what the difference is.

___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@wireshark.org>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@wireshark.org?subject=unsubscribe

This message: [ Message body ]
Next message: Morty: "Re: [Wireshark-users] remote capture framework"
Previous message: mike_at_nospam: "Re: [Wireshark-users] One NIC on public side"
In reply to: Gianluca Varenni: "Re: [Wireshark-users] One NIC on public side"
Next in thread: mike_at_nospam: "Re: [Wireshark-users] One NIC on public side"

Contemporary messages sorted: [ By Date ] [ By Thread ] [ By Subject ] [ By Author ]